Search results for " molybdenum"

Vanadium and molybdenum concentrations in particulate from Palermo (Italy): analytical methods using voltammetry

2014

The main purpose of this work was to develop a reliable method for the determination of vanadium (V) and molybdenum (Mo) in atmosphere particles or aerosols because they can not be readily measured using conventional techniques. For this research, 30 particulate samples were collected from five different stations located at Palermo, Italy. We used the catalytic adsorptive stripping voltammetry and differential pulsed voltammetry to measure Vand Mo in atmospheric particulate, respectively. The represented method includes advantages of high sensitivity, high selectivity, simplicity, reproducibility, speed and low costs. The quantification limits for V and Mo are, respectively, 0.57 and 0.80 n…

Efficient Vacuum Deposited P-I-N Perovskite Solar Cells by Front Contact Optimization.

2020

Hole transport layers HTLs are of fundamental importance in perovskite solar cells PSCs , as they must ensure an efficient and selective hole extraction, and ohmic charge transfer to the corresponding electrodes. In p i n solar cells, the ITO HTL is usually not ohmic, and an additional interlayer such as MoO3 is usually placed in between the two materials by vacuum sublimation. In this work, we evaluated the properties of the MoO3 TaTm TaTm is the HTL N4,N4,N4 amp; 8243;,N4 amp; 8243; tetra [1,1 amp; 8242; biphenyl] 4 yl [1,1 amp; 8242; 4 amp; 8242;,1 amp; 8243; terphenyl] 4,4 amp; 8243; diamine hole extraction interface by selectively annealing either MoO3 prior to the deposition of TaTm o…

Characterization of the defect density states in MoOx for c-Si solar cell applications

2021

Thin layers of MoOx have been deposited by thermal evaporation followed by post-deposition annealing. The density of states distributions of the MoOx films were extracted deconvoluting the absorption spectra, measured by a photothermal deflection spectroscopy setup, including the small polaron contribution. Results revealed a sub-band defect distribution centered 1.1 eV below the conduction band; the amplitude of this distribution was found to increase with post-deposition annealing temperature and film thickness.

Comparison of spring characteristics of titanium-molybdenum alloy and stainless steel

2017

Background Titanium-molybdenum alloy (TMA) and stainless steel (SS) wires are commonly used in orthodontics as arch-wires for tooth movement. However, plastic deformation phenomenon in these arch-wires seems to be a major concern among orthodontists. This study aimed to compare the mechanical properties of TMA and SS wires with different dimensions. Material and Methods Seventy-two wire samples (36 TMA and 36 SS) of three different sizes (19×25, 17×25 and 16×22) were analyzed in vitro, with 12 samples in each group. Various mechanical properties of the wires, including spring-back, bending moment and stiffness were determined using a universal testing machine. Student’s t-test showed statis…

Colloidally Confined Crystallization of Highly Efficient Ammonium Phosphomolybdate Catalysts

2018

Nanodroplets in inverse miniemulsions provide a colloidal confinement for the crystallization of ammonium phosphomolybdate (APM), influencing the resulting particle size. The effects of the space confinement are investigated by comparing the crystallization of analogous materials both in miniemulsion and in bulk solution. Both routes result in particles with a rhombododecahedral morphology, but the ones produced in miniemulsion have sizes between 40 and 90 nm, 3 orders of magnitude smaller than the ones obtained in bulk solution. The catalytic activity of the materials is studied by taking the epoxidation of cis-cyclooctene as a model reaction. The miniemulsion route yields APM particles ca…

A New Potential Dietary Approach to Supply Micronutrients to Physically Active People through Consumption of Biofortified Vegetables

2022

Micronutrients are required in many reactions involved in physical activity and exercise. Most physically active people do not meet the body’s needs in terms of micronutrients through diet. The novelty of the present manuscript is the use of an innovative dietary approach to supply micronutrients to physically active people through biofortified food. Therefore, the key point of this study was to verify whether supplementation with biofortified vegetables—and specifically molybdenum (Mo)-enriched lettuce—in healthy volunteers affects essential regulators of body homeostasis and, specifically, hematological parameters, iron and lipid metabolism, and hepatic function. Twenty-…

X-ray diffraction measurements of Mo melting to 119 GPa and the high pressure phase diagram

2009

In this paper, we report angle-dispersive X-ray diffraction data of molybdenum melting, measured in a double-sided laser-heated diamond-anvil cell up to a pressure of 119 GPa and temperatures up to 3400 K. The new melting temperatures are in excellent agreement with earlier measurements up to 90 GPa that relied on optical observations of melting and in strong contrast to most theoretical estimates. The X-ray measurements show that the solid melts from the bcc structure throughout the reported pressure range and provide no evidence for a high temperature transition from bcc to a close-packed structure, or to any other crystalline structure. This observation contradicts earlier interpretation…

Nuclear charge radii of molybdenum fission fragments

2009

Abstract Radioisotopes of molybdenum have been studied using laser spectroscopy techniques at the IGISOL facility, University of Jyvaskyla. Differences in nuclear charge radii have been determined for neutron deficient isotopes 90,91Mo and neutron rich isotopes 102–106,108Mo (and all stable isotopes). A smooth transition in the mean square charge radii is observed as the neutron number increases with no sudden shape change observed in the region around N = 60 . As N increases, the nuclear deformation appears to go beyond a maximum and a fall off at N = 66 is observed. The magnetic moments of the odd isotopes 91,103,105Mo are also determined.

Mo-W-containing tetragonal tungsten bronzes through isomorphic substitution of molybdenum by tungsten

2010

Mixed metal oxides based in Mo(W)–Nb–V–Te with tetragonal tungsten bronze (TTB) structure have been synthesized by a hydrothermal method from aqueous solutions of the corresponding Keggin-type heteropolyacids and further heat-treatment in N2 at 700 ◦ C. The materials have been characterized by several physico-chemical techniques, i.e. XRD, Raman, FTIR, SEM-EDS, and TEM. This procedure allows controlling the chemical species to be distributed in the different interstices of the TTB skeleton, which is a key factor to regulate the catalytic properties of the final solid. In this sense, the isomorphic replacement of Mo by W results in lattice parameter and crystal morphology variation, although…

Characterization of defect density states in MoOx for c-Si solar cell applications

Layers of MoOx have been deposited by thermal evaporation followed by post-deposition annealing (PDA). The density of states (DOS) distributions of the MoOx films were extracted deconvoluting the absorption spectra, measured by a phothermal deflection spectroscopy setup, including the small polaron contribution. Results revealed a sub-band defect distribution centered 1.1 eV below the conduction band; the amplitude of this distribution was found to increase with PDA temperature and film thickness.